I have two bluetooth devices connected to my Moto G.
My car and a bluetooth speaker in the bedroom.
Every time I get near one of these devices, Neutron immediately starts and begins to play music.
Is there any setting in Neutron to get it to not do this? I'd rather manually start it up.
neutron automatically starts to connected bluetooth
-
- Posts: 11
- Joined: Sat Dec 26, 2015 5:34 pm
-
- Posts: 42
- Joined: Wed Feb 26, 2014 8:03 am
Re: neutron automatically starts to connected bluetooth
there are several settings in "Connection and Controls",
to avoid autoplay you have to turn off "Play if Output Attached"
Ste
to avoid autoplay you have to turn off "Play if Output Attached"
Ste
Re: neutron automatically starts to connected bluetooth
Is it possible to make to separate control toggles, the one for 3.5 plug, and the other for bluetooth? Or, at least, to make such selection inside the current option? I enjoy starting music when my wired headphones connected, but it's annoying to switch Neutron off for the bluetooth headset or in the car.
-
- Posts: 11
- Joined: Sat Dec 26, 2015 5:34 pm
Re: neutron automatically starts to connected bluetooth
"there are several settings in "Connection and Controls",
to avoid autoplay you have to turn off "Play if Output Attached""
I did this, "Play if Output Attached" is unchecked.... neutron still starts up and plays whenever it gets anywhere near my car, which is the Ford Sync system.
Anything else i can try?
to avoid autoplay you have to turn off "Play if Output Attached""
I did this, "Play if Output Attached" is unchecked.... neutron still starts up and plays whenever it gets anywhere near my car, which is the Ford Sync system.
Anything else i can try?
-
- Posts: 11
- Joined: Sat Dec 26, 2015 5:34 pm
Re: neutron automatically starts to connected bluetooth
Bump
Is there still no answer to this?
I have "Play if Output Attached" Turned OFF
and Neutron automatically launches and starts playing whenever it gets near my car.
I've also tried an app called Bluetooth Connect and Play and set it to NOT PLAY whenever it connects.
Nothing works.
Any ideas?
Is there still no answer to this?
I have "Play if Output Attached" Turned OFF
and Neutron automatically launches and starts playing whenever it gets near my car.
I've also tried an app called Bluetooth Connect and Play and set it to NOT PLAY whenever it connects.
Nothing works.
Any ideas?
-
- Posts: 1
- Joined: Sun May 27, 2018 2:10 am
Re: neutron automatically starts to connected bluetooth
Settings
Connection and controls
Play if out put is attached
There Uncheck LINE OUT
Connection and controls
Play if out put is attached
There Uncheck LINE OUT
Who is online
Users browsing this forum: No registered users and 38 guests