EQ Sharing

Support questions for Neutron Player only.
TYA
Posts: 158
Joined: Wed Mar 21, 2012 2:32 am

EQ Sharing

Post by TYA » Fri Jan 18, 2013 11:58 am

No need to much talking , just Sharing EQ preset for some device(s)
PURPOSE : To make you more satisfy using this charming app .

Here are my profile for galaxy s3 and Note 2 . They are sparately for each device.
Hope you like it !
NOTE 2
http://db.tt/iyynbJfm


S3
http://db.tt/fBwlIkRM

I hope I'll be shared by others user, also .

How to do :
1) force close your neutron (fc it . Stop it is Not enough)
2) copy paste the xml from the link to sdcard/android/data/com.neutroncode.mp
Just it.

You should run neutron and to check eq now!
Last edited by TYA on Thu Dec 26, 2013 11:29 am, edited 1 time in total.

Emre
Posts: 5
Joined: Thu Aug 01, 2013 12:01 pm

Re: EQ Sharing

Post by Emre » Thu Aug 01, 2013 2:34 pm

Hello, a bit late, but could you share your settings again? Because DB says it exceeded bandwidth, etc. I could really use some help in Neutron settings.

TYA
Posts: 158
Joined: Wed Mar 21, 2012 2:32 am

Re: EQ Sharing

Post by TYA » Fri Aug 09, 2013 5:42 pm

Emre wrote:Hello, a bit late, but could you share your settings again? Because DB says it exceeded bandwidth, etc. I could really use some help in Neutron settings.

Hey man, here it is
http://www.mediafire.com/?kq91ekso5xeql3x

Emre
Posts: 5
Joined: Thu Aug 01, 2013 12:01 pm

Re: EQ Sharing

Post by Emre » Tue Sep 10, 2013 8:54 pm

Thanks, gonna try that. (sorry for late answer)

Was this for Note2?

TYA
Posts: 158
Joined: Wed Mar 21, 2012 2:32 am

Re: EQ Sharing

Post by TYA » Fri Sep 13, 2013 2:58 pm

Emre wrote:Thanks, gonna try that. (sorry for late answer)

Was this for Note2?
Yes.
The way to put into Neutron app : 1. Force close neutron, 2. Replace to existing file (at sd/android/data/com.neutroncode/ (find it actually)

Parametric EQ of neutron has one thing special : Q slope for treble , if set equal to 0.000 will make you wonder with the sound.
Ref : treble band 12000hz
Q =0.000 (not yet in the eq, it is 0.010)
(To get this zero, key in, dont slide the slider, dev not yet allow slide to zero).

Hope it help.

cggorman
Posts: 13
Joined: Mon Oct 07, 2013 7:12 pm

Re: EQ Sharing

Post by cggorman » Tue Dec 10, 2013 1:54 pm

LG G2 (verizon, vs980) on stock ROM & stock Kernel. No sound altering apps/tweaks/hacks.

Two eq curves for Shure SE535. One is a direct copy from Head-Fi. The other is my own.
I also keep a flat eq preset for BT streaming to my car stereo (which has its own parmetric EQ)

https://www.dropbox.com/s/7e20nanmd1t8n ... resets.xml

TYA
Posts: 158
Joined: Wed Mar 21, 2012 2:32 am

Re: EQ Sharing

Post by TYA » Wed Dec 18, 2013 11:57 pm

Hi there,
You sure there is copy in my setting?
I set an Eq. on my own test and feel .
I wrote a topic in my local forum and it is very old date. Maybe older than "original" you said.
What is evident to say some thing is pasted from a source?
Because of the same content or what you see at first is the source?
Thanks for comment.

TYA
Posts: 158
Joined: Wed Mar 21, 2012 2:32 am

Re: EQ Sharing

Post by TYA » Tue Dec 24, 2013 5:49 am

EQ setting for Note2 users driving a Senn HD650/HD700/HD800.
Profiles : Native, Soft, Crystal and Impact.

Copy below syntax to 2nd line (right after "<eqp4>") of your Eqpreset. Xml
(Located at /sd/android/data/com. Neutroncode.mp/)

<preset id="11" name="HD650_1(Native)" bind="0">
<band id="LOW" gain="4.5999999" freq="200.00" Q="0.60000002" />
<band id="MID1" gain="3.33999991" freq="1500.00" width="0.5" />
<band id="MID2" gain="2.50999999" freq="9000.00" width="0.5" />
<band id="HIGH" gain="3.75999999" freq="12000.00" Q="0.00" />
</preset>
<preset id="12" name="HD650_2(Soft)" bind="0">
<band id="LOW" gain="3.75999999" freq="200.00" Q="0.5" />
<band id="MID1" gain="3.05999994" freq="2000.00" width="1.00" />
<band id="MID2" gain="-2.79999995" freq="4500.00" width="0.5" />
<band id="HIGH" gain="2.92999983" freq="9000.00" Q="2.00" />
</preset>
<preset id="13" name="HD650_3(Impact)" bind="0">
<band id="LOW" gain="5.15999985" freq="120.00" Q="1.20000005" />
<band id="MID1" gain="5.15999985" freq="1500.00" width="0.69999999" />
<band id="MID2" gain="3.19999981" freq="9000.00" width="0.5" />
<band id="HIGH" gain="5.29999971" freq="12000.00" Q="0.01" />
</preset>
<preset id="15" name="HD650_4(Crystial)" bind="0">
<band id="LOW" gain="5.15999985" freq="200.00" Q="0.2" />
<band id="MID1" gain="3.50999999" freq="1500.00" width="0.34999999" />
<band id="MID2" gain="2.23000002" freq="4500.00" width="0.45694372" />
<band id="HIGH" gain="4.38999987" freq="18000.00" Q="0.01" />
</preset>

romanas
Posts: 18
Joined: Fri Mar 07, 2014 12:50 pm

Re: EQ Sharing

Post by romanas » Mon Mar 10, 2014 12:47 pm

Hi All,

This is a great thread, I've also been using this method to backup/restore the eq settings and streaming url's. I attached my eq settings should anyone be interested trying. I use them with Monster Turbine Pro Copper, Etymotic ER-4S (with amp), Sony xba-3, AKG k420, modified Fostex T50RP (with amp) and some BT adapters.

I hope my eq taste is not too far off from yours...

Romanas.
Attachments
eq_presets.xml.zip
(486 Bytes) Downloaded 1732 times

FEC
Posts: 2
Joined: Fri Mar 14, 2014 12:56 am

Re: EQ Sharing

Post by FEC » Fri Mar 14, 2014 1:14 am

Great thread.....anyone have a setting for an external speaker (Boombot Rex)?

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 50 guests