USB DAC support on USB OTG enabled devices

Translations of Neutron's UI into different languages other than those coming in standard package.

Re: USB DAC support on USB OTG enabled devices

Postby Nicholas Ku » Tue Jun 14, 2016 10:45 pm

Samsung Galaxy Note 4 (Android 6.0.1) pairing with Xduoo XD-05 DAC/Amp.
No problems with this setup when using Generic driver (DAC frequensy is always 192kHz).But it has clicks even on 16/44.1 files, while choosing Direct USB Driver. Hi-res and especially DSD files is playing with glitches and lot of clicks. There is a not hardware problem, cause "USB Audio Player" plays flawlessly same FLACs ans DSFs
Nicholas Ku
 
Posts: 2
Joined: Tue Jun 14, 2016 10:04 pm

Re: USB DAC support on USB OTG enabled devices

Postby ZERO » Fri Aug 05, 2016 11:21 am

Oppo wrote:Below please find some more information on which HW/SW configurations glitches/clicks appear too. Please tell if you will need more info.

For me this issue happens on multiple phones/Neutron settings, and details below describe settings where issue DOES occur, unless stated otherwise. I tried different settings, which in my opinion could eliminate glitching, but did not succeed. Below I provide only the settings, which are applicable IMO.

==================================

1. Phone: HTC 1 M8
Neutron versions: 1.87.1, 1.88.1
64-Bit Processing: on/off
VEC: NEON
DRV: OpenSl ES
Direct USB driver: on
32-bit Output: on/off
Frequency: 48000
Hardware latency: 2-192

**********************************
2. Phone: Alcatel 8008D: issue never occurs
Neutron versions: 1.87.1, 1.88.1
64-Bit Processing: on/off
VEC: NEON
DRV: OpenSl ES
Direct USB driver: on
32-bit Output: on/off
Frequency: 44100
Hardware latency: 2-192
**********************************

In below two configurations audio data is sent via USB to external DAC "Oppo HA-2", and this is where
severe glitching/clicking occurs.

3. Phone: HTC 1 M8
Neutron versions: 1.87.1, 1.88.1
64-Bit Processing: on/off
VEC: NEON
DRV: Oppo
Direct USB driver: on
32-bit Output: on/off
Frequency: 44100-352800
Hardware latency:
0-30: extreme glitching
300-400: less glitching

4. Phone: Alcatel 8008D
Neutron versions: 1.87.1, 1.88.1
64-Bit Processing: on/off
VEC: NEON
DRV: Oppo
Direct USB driver: on
32-bit Output: on/off
Frequency: 44100-352800
Hardware latency:
0-30: extreme glitching
300-398: less glitching

Audio source: MP3, FLAC, WAV, WV, with whole bunch of different frequencies, 16-bit; it seems that on some MP3s glitching/clicking is much worse, than on FLACs, surprisingly.

================================

It seems, that on HTC 1 with external DAC plugged in glitching disappears after long continuing listening. (I cannot tell exactly after which period of time, and I'm not sure here), but once another song is selected or forwarded to - glitching always reappears.

NOTE: the same issue with glitching occur in Onkyo HF player, when data is sent through USB to external DAC, hence I believe the problem exists not only in Neutron player.


Is this still an issue? I am considering getting an OPPO HA-2 for my Moto X Pure and want to make sure it is actually going to work before I buy it.
ZERO
 
Posts: 3
Joined: Thu Dec 10, 2015 12:43 pm

Re: USB DAC support on USB OTG enabled devices

Postby schiff1108 » Wed Apr 11, 2018 12:50 am

I am using the Neutron DAC feature since many years. Very nice. First with Samsung S3, later an s5.

Actually, I got a Samsung s7. But I cannot my external DAC working. I have an ibasso D-Zero MK2.

All time, I was using custom ROMs based on LineageOS.

Do I forget anything. Do I have to taken a certain configuration in Android or NeutronMP?

Might there be a mismatch between the S7 and my nice ibasso?
schiff1108
 
Posts: 10
Joined: Sat Nov 29, 2014 1:25 am

Re: USB DAC support on USB OTG enabled devices

Postby Rod2 » Sat May 12, 2018 4:29 pm

I'm unsing a Samsung Tab E Lite 7" tablet.

Just got the Dragonfly Black DAC and an OTG cable.

The Dragonfly works perfectly connected to USB of my windows 7 laptop

but nothing from Samsung tablet. Music plays from the tablet speakers, nothing from the headphones connected to the Dragonfly.

Have looked at Audio Hardware section in Neutron and cannot make the music go to the USB output, no matter what.

Any advice? Is it possible it simply will not work with this tablet? it is running android version 4.4.4
Rod2
 
Posts: 9
Joined: Tue Feb 14, 2017 9:35 pm

Re: USB DAC support on USB OTG enabled devices

Postby csricharan » Tue Jul 17, 2018 10:45 am

I have an Honor 7 and recently bought a Fiio Q1 Mk2. After some figuring out, I got it to work with the DAC but there is some sort of electronic interference which manifests as a low volume crackling noise when I scroll down the song list, use other functions or use the phone in any way. Does anyone have a solution? Because, I will have to return the DAC if I can't find a solution.
csricharan
 
Posts: 1
Joined: Fri May 13, 2016 3:37 pm

Re: USB DAC support on USB OTG enabled devices

Postby Duck life » Mon Dec 10, 2018 2:07 am

USB DAC support on USB OTG devices is great. I appreciate the support of this USB.

happy wheels
Duck life
 
Posts: 8
Joined: Fri Nov 23, 2018 8:25 am

Previous

Return to Localization



Who is online

Users browsing this forum: No registered users and 2 guests