Page 1 of 4
FiiO M6, M7, M9, M11 DAP support information
Posted: Wed Jul 31, 2019 8:37 pm
by dmitrykos
M11:
Support since 2.11.0.
Output format: PCM (32-bit, <= 384 kHz) and native DSD (DSD64, DSD128).
M6, M7, M9:
Support since 2.11.1.
Output format: PCM (24-bit, <= 192 kHz) and native DSD (DSD64) on M7, M9. Neutron will not be able to support native DSD output on M6 according Fiio's technical support comment.
Re: FiiO M6, M7, M9, M11 DAP support information
Posted: Wed Aug 07, 2019 10:06 am
by superuser1
i understand this maybe off topic however i thought it better to ask here than start a thread about registering on the Fiio M6
EDIT: i tried both pop3 as well as imap from the M6 (gmail) but it just doesnt seem to register it.
Re: FiiO M6, M7, M9, M11 DAP support information
Posted: Wed Aug 07, 2019 10:50 am
by blaubär
superuser1 wrote: ↑Wed Aug 07, 2019 10:06 am
i understand this maybe off topic however i thought it better to ask here than start a thread about registering on the Fiio M6
EDIT: i tried both pop3 as well as imap from the M6 (gmail) but it just doesnt seem to register it.
Did you try this ?
dmitrykos wrote: ↑Thu Jul 18, 2019 5:21 pm
If device lacks ability to add e-mail account (for example Gmail) to the OS then the other way is to add it manually to Neutron via: Settings -> Help -> Account -> [+].
If account is added Neutron tries to login to it and if succeeds this e-mail becomes valid for the license check, as if it was obtained from the OS as e-mail account.
The details are in FAQ:
Q: I purchased Neutron via PayPro but still getting Trial Expire, how to fix it?
http://neutronmp.com/faq
This check will work even with non-Android environment.
Re: FiiO M6, M7, M9, M11 DAP support information
Posted: Wed Aug 07, 2019 5:53 pm
by superuser1
blaubär wrote: ↑Wed Aug 07, 2019 10:50 am
superuser1 wrote: ↑Wed Aug 07, 2019 10:06 am
i understand this maybe off topic however i thought it better to ask here than start a thread about registering on the Fiio M6
EDIT: i tried both pop3 as well as imap from the M6 (gmail) but it just doesnt seem to register it.
Did you try this ?
dmitrykos wrote: ↑Thu Jul 18, 2019 5:21 pm
If device lacks ability to add e-mail account (for example Gmail) to the OS then the other way is to add it manually to Neutron via: Settings -> Help -> Account -> [+].
If account is added Neutron tries to login to it and if succeeds this e-mail becomes valid for the license check, as if it was obtained from the OS as e-mail account.
The details are in FAQ:
Q: I purchased Neutron via PayPro but still getting Trial Expire, how to fix it?
http://neutronmp.com/faq
This check will work even with non-Android environment.
i did actually
Re: FiiO M6, M7, M9, M11 DAP support information
Posted: Wed Aug 07, 2019 6:19 pm
by blaubär
superuser1 wrote: ↑Wed Aug 07, 2019 5:53 pm
i did actually
Then you'd better write to the developer at
neutronmp@gmail.com .
Re: FiiO M6, M7, M9, M11 DAP support information
Posted: Sun Aug 11, 2019 6:46 pm
by Safeloridi
I have purchased a license to use Neutron for my Fiio M9 and I have not been able to activate it. I have followed the steps I have seen in the different forums:
1.- I have registered an email account (the same one that I specified in the payment)
2.- I have tested and configured both POP and IMAP protocols
3.- I have activated the use of unsafe applications in my email
Everything has failed me, what should I do?
Regards, I hope your help
Re: FiiO M6, M7, M9, M11 DAP support information
Posted: Mon Aug 12, 2019 4:49 am
by blaubär
Safeloridi wrote: ↑Sun Aug 11, 2019 6:46 pm
Everything has failed me, what should I do?
Retry and recheck, document your settings with screenshots, if it won't work and no other users have any ideas write to
neutronmp@gmail.com
Re: FiiO M6, M7, M9, M11 DAP support information
Posted: Mon Aug 12, 2019 7:05 am
by blaubär
Safeloridi wrote: ↑Sun Aug 11, 2019 6:46 pm
Everything has failed me, what should I do?
jimfaker ( thanks a lot ! ) has further suggestions :
jimfaker wrote: ↑Mon Aug 12, 2019 6:58 am
Recheck the mail settings. Check in the providers site for info. I guess its gmail. If it is, the correct address is pop3s://pop.gmail.com, and the login should be the full adress, including the @gmail.com. If the unsafe applications are enabled and he has permitted that access, all should work. Maybe check which aplications have access, maybe he clicked "don't allow" the first time.
Re: FiiO M6, M7, M9, M11 DAP support information
Posted: Mon Aug 12, 2019 2:09 pm
by TheFrenchman
Hi
Configuration with GMAIL and Imap should be like that :
imaps://imap.gmail.com
Don't forget the "s" at the first "imaps://
Regards
Re: FiiO M6, M7, M9, M11 DAP support information
Posted: Mon Aug 12, 2019 3:57 pm
by TheFrenchman
Hi,
In GMAIL parameters you must also activate IMAP (transfer POP/IMAP) if you use IMAP...