EQ Sharing
EQ Sharing
No need to much talking , just Sharing EQ preset for some device(s)
PURPOSE : To make you more satisfy using this charming app .
Here are my profile for galaxy s3 and Note 2 . They are sparately for each device.
Hope you like it !
NOTE 2
http://db.tt/iyynbJfm
S3
http://db.tt/fBwlIkRM
I hope I'll be shared by others user, also .
How to do :
1) force close your neutron (fc it . Stop it is Not enough)
2) copy paste the xml from the link to sdcard/android/data/com.neutroncode.mp
Just it.
You should run neutron and to check eq now!
PURPOSE : To make you more satisfy using this charming app .
Here are my profile for galaxy s3 and Note 2 . They are sparately for each device.
Hope you like it !
NOTE 2
http://db.tt/iyynbJfm
S3
http://db.tt/fBwlIkRM
I hope I'll be shared by others user, also .
How to do :
1) force close your neutron (fc it . Stop it is Not enough)
2) copy paste the xml from the link to sdcard/android/data/com.neutroncode.mp
Just it.
You should run neutron and to check eq now!
Last edited by TYA on Thu Dec 26, 2013 11:29 am, edited 1 time in total.
Re: EQ Sharing
Hello, a bit late, but could you share your settings again? Because DB says it exceeded bandwidth, etc. I could really use some help in Neutron settings.
Re: EQ Sharing
Emre wrote:Hello, a bit late, but could you share your settings again? Because DB says it exceeded bandwidth, etc. I could really use some help in Neutron settings.
Hey man, here it is
http://www.mediafire.com/?kq91ekso5xeql3x
Re: EQ Sharing
Thanks, gonna try that. (sorry for late answer)
Was this for Note2?
Was this for Note2?
Re: EQ Sharing
Yes.Emre wrote:Thanks, gonna try that. (sorry for late answer)
Was this for Note2?
The way to put into Neutron app : 1. Force close neutron, 2. Replace to existing file (at sd/android/data/com.neutroncode/ (find it actually)
Parametric EQ of neutron has one thing special : Q slope for treble , if set equal to 0.000 will make you wonder with the sound.
Ref : treble band 12000hz
Q =0.000 (not yet in the eq, it is 0.010)
(To get this zero, key in, dont slide the slider, dev not yet allow slide to zero).
Hope it help.
Re: EQ Sharing
LG G2 (verizon, vs980) on stock ROM & stock Kernel. No sound altering apps/tweaks/hacks.
Two eq curves for Shure SE535. One is a direct copy from Head-Fi. The other is my own.
I also keep a flat eq preset for BT streaming to my car stereo (which has its own parmetric EQ)
https://www.dropbox.com/s/7e20nanmd1t8n ... resets.xml
Two eq curves for Shure SE535. One is a direct copy from Head-Fi. The other is my own.
I also keep a flat eq preset for BT streaming to my car stereo (which has its own parmetric EQ)
https://www.dropbox.com/s/7e20nanmd1t8n ... resets.xml
Re: EQ Sharing
Hi there,
You sure there is copy in my setting?
I set an Eq. on my own test and feel .
I wrote a topic in my local forum and it is very old date. Maybe older than "original" you said.
What is evident to say some thing is pasted from a source?
Because of the same content or what you see at first is the source?
Thanks for comment.
You sure there is copy in my setting?
I set an Eq. on my own test and feel .
I wrote a topic in my local forum and it is very old date. Maybe older than "original" you said.
What is evident to say some thing is pasted from a source?
Because of the same content or what you see at first is the source?
Thanks for comment.
Re: EQ Sharing
EQ setting for Note2 users driving a Senn HD650/HD700/HD800.
Profiles : Native, Soft, Crystal and Impact.
Copy below syntax to 2nd line (right after "<eqp4>") of your Eqpreset. Xml
(Located at /sd/android/data/com. Neutroncode.mp/)
<preset id="11" name="HD650_1(Native)" bind="0">
<band id="LOW" gain="4.5999999" freq="200.00" Q="0.60000002" />
<band id="MID1" gain="3.33999991" freq="1500.00" width="0.5" />
<band id="MID2" gain="2.50999999" freq="9000.00" width="0.5" />
<band id="HIGH" gain="3.75999999" freq="12000.00" Q="0.00" />
</preset>
<preset id="12" name="HD650_2(Soft)" bind="0">
<band id="LOW" gain="3.75999999" freq="200.00" Q="0.5" />
<band id="MID1" gain="3.05999994" freq="2000.00" width="1.00" />
<band id="MID2" gain="-2.79999995" freq="4500.00" width="0.5" />
<band id="HIGH" gain="2.92999983" freq="9000.00" Q="2.00" />
</preset>
<preset id="13" name="HD650_3(Impact)" bind="0">
<band id="LOW" gain="5.15999985" freq="120.00" Q="1.20000005" />
<band id="MID1" gain="5.15999985" freq="1500.00" width="0.69999999" />
<band id="MID2" gain="3.19999981" freq="9000.00" width="0.5" />
<band id="HIGH" gain="5.29999971" freq="12000.00" Q="0.01" />
</preset>
<preset id="15" name="HD650_4(Crystial)" bind="0">
<band id="LOW" gain="5.15999985" freq="200.00" Q="0.2" />
<band id="MID1" gain="3.50999999" freq="1500.00" width="0.34999999" />
<band id="MID2" gain="2.23000002" freq="4500.00" width="0.45694372" />
<band id="HIGH" gain="4.38999987" freq="18000.00" Q="0.01" />
</preset>
Profiles : Native, Soft, Crystal and Impact.
Copy below syntax to 2nd line (right after "<eqp4>") of your Eqpreset. Xml
(Located at /sd/android/data/com. Neutroncode.mp/)
<preset id="11" name="HD650_1(Native)" bind="0">
<band id="LOW" gain="4.5999999" freq="200.00" Q="0.60000002" />
<band id="MID1" gain="3.33999991" freq="1500.00" width="0.5" />
<band id="MID2" gain="2.50999999" freq="9000.00" width="0.5" />
<band id="HIGH" gain="3.75999999" freq="12000.00" Q="0.00" />
</preset>
<preset id="12" name="HD650_2(Soft)" bind="0">
<band id="LOW" gain="3.75999999" freq="200.00" Q="0.5" />
<band id="MID1" gain="3.05999994" freq="2000.00" width="1.00" />
<band id="MID2" gain="-2.79999995" freq="4500.00" width="0.5" />
<band id="HIGH" gain="2.92999983" freq="9000.00" Q="2.00" />
</preset>
<preset id="13" name="HD650_3(Impact)" bind="0">
<band id="LOW" gain="5.15999985" freq="120.00" Q="1.20000005" />
<band id="MID1" gain="5.15999985" freq="1500.00" width="0.69999999" />
<band id="MID2" gain="3.19999981" freq="9000.00" width="0.5" />
<band id="HIGH" gain="5.29999971" freq="12000.00" Q="0.01" />
</preset>
<preset id="15" name="HD650_4(Crystial)" bind="0">
<band id="LOW" gain="5.15999985" freq="200.00" Q="0.2" />
<band id="MID1" gain="3.50999999" freq="1500.00" width="0.34999999" />
<band id="MID2" gain="2.23000002" freq="4500.00" width="0.45694372" />
<band id="HIGH" gain="4.38999987" freq="18000.00" Q="0.01" />
</preset>
Re: EQ Sharing
Hi All,
This is a great thread, I've also been using this method to backup/restore the eq settings and streaming url's. I attached my eq settings should anyone be interested trying. I use them with Monster Turbine Pro Copper, Etymotic ER-4S (with amp), Sony xba-3, AKG k420, modified Fostex T50RP (with amp) and some BT adapters.
I hope my eq taste is not too far off from yours...
Romanas.
This is a great thread, I've also been using this method to backup/restore the eq settings and streaming url's. I attached my eq settings should anyone be interested trying. I use them with Monster Turbine Pro Copper, Etymotic ER-4S (with amp), Sony xba-3, AKG k420, modified Fostex T50RP (with amp) and some BT adapters.
I hope my eq taste is not too far off from yours...
Romanas.
- Attachments
-
- eq_presets.xml.zip
- (486 Bytes) Downloaded 1738 times
Re: EQ Sharing
Great thread.....anyone have a setting for an external speaker (Boombot Rex)?
Who is online
Users browsing this forum: Bing [Bot] and 32 guests